Metal Fence & Barriers

Description

Metal Fence & Barriers

Metal fence and barrier systems provide temporary perimeter separation, managed access and designated protection arrangements on building sites. This catalogue covers mobile mesh fences, partly sheeted panels, pedestrian and vehicle gates, and a separate family of fixed-post safety barriers. Select the complete assembly for the intended use: perimeter fencing and edge-protection systems have different design requirements.

Mobile Fence Panels

• MBF mesh panel: catalogue dimensions of 2000 mm high × 3500 mm wide, 50 × 150 mm mesh opening and 3 mm wire. Galvanized tubular-frame options are listed in several diameters, with corresponding weights.
• MBF-TS partly sheeted panel: 2000 mm high × 3250 mm wide, with 0.45 mm trapezoidal sheet in the listed configuration.
• MBF-U extension: 500 mm high × 3500 mm wide mesh reference, shown as an additional panel arrangement.

Panel weights vary by frame diameter and configuration. State the required reference and drawing when requesting a price. Site wind exposure, ground conditions, ballast and stabilisation must be assessed for the selected assembly, especially where sheeted panels are used.

Access Gates and Supporting Components

The mobile-fence range includes the MBF-D1 single pedestrian gate, MBF-D2 double gate and MBF-D3 wheeled gate. The catalogue lists the pedestrian gate as 2000 × 1000 mm and the double-gate assembly as 2000 × 4000 mm. Gate leaves, hinges, locking details, wheel arrangements and clear opening should be confirmed against the project layout.

Associated components include concrete-filled plastic feet, galvanized panel clamps, stabilising braces, pins, steel feet and gate support parts. Quantities should cover the full fence run, corners, returns and access points rather than panels alone.

Fixed-Post Safety Barriers

A separate catalogue family includes mesh barriers with integrated toe boards, shaft-opening barriers, galvanized posts, clamps and adjustable brackets. Powder-coated colour options are shown for selected panels. For edge or opening protection, request the applicable current system test documentation, permitted fixing arrangements and installation instructions. A certificate reproduced in the catalogue does not establish that every possible site assembly meets the same requirements.

Request a Quotation

Send the total fence length, required height, panel type, number and width of gates, surface conditions, preferred finish and delivery location. Include drawings and identify whether the requirement is perimeter separation or a specified protection system. Marouf Türk will confirm the component schedule, current technical documentation, packing, availability and delivery terms for the selected package.

View the original metal fence and barriers catalogue