Eco-Friendly Plastering — ADEEM Green Plaster

Description

ADEEM Green Plaster

ADEEM Green Plaster is presented in the Marouf catalogue as a volcanic-mineral plastering material developed to reduce reliance on ordinary Portland cement clinker. The range is offered for project specification and supply enquiries, with the selected formulation and application method confirmed against current technical documentation.

Applications in the Catalogue

• Internal and external plastering on suitable prepared substrates.
• Mortar applications for bricks and blocks, subject to the selected product instructions.
• Repair work where the substrate, exposure and required strength are compatible with the formulation.

The catalogue lists a plaster thickness range of 0.5–2.5 cm. Confirm whether the requested build-up is applied in one or more coats, together with substrate preparation, primers, reinforcement and finishing requirements. The product should be selected as part of the complete wall system.

Published Performance References

The brochure reports compressive strength of 20 MPa and adhesion of 5 MPa at 28 days. These are catalogue statements, not independently verified project test results. Request the current technical data sheet and supporting test methods for the exact supplied product before adopting these values in a specification.

Reduced water demand and reduced curing-water requirements are described for cold or moderate climates. Site temperature, wind, substrate suction and exposure can change the curing requirements; follow the confirmed application instructions for the actual conditions.

Environmental Documentation

The presentation includes a 70% CO2-reduction claim. Its comparison baseline, assessment boundary and supporting environmental declaration are not provided in the supplied brochure, so this page does not treat that percentage as a verified project saving. Where a project requires embodied-carbon reporting or green-building credits, request the relevant EPD or life-cycle assessment and confirm applicability to the selected formulation and supply location.

Project Selection and Quotation

Use the quotation form with the wall area, proposed thickness, substrate, indoor or outdoor use and delivery destination. Include the required finish, programme and any test or environmental documentation requirements. Packaging, consumption, mixing water, working time, availability and delivery terms will be confirmed for the selected product.

The linked presentation also contains a separate clay-coating section. Its ingredients and application instructions belong to that clay system and should not be transferred to ADEEM Green Plaster.

View the ADEEM plastering and clay-coatings presentation