General Purpose & Epoxy Adhesives

Descrizione

General Purpose & Epoxy Adhesives

Explore ALCON epoxy adhesives, repair putties and anaerobic thread-locking references from the Marouf Türk catalogue. This selection covers several bonding and repair tasks, with separate products for rapid bonding, rigid-surface filling and threaded assemblies. Choose by substrate, joint design, working time and service conditions.

Rapid epoxy adhesives

JAL-ALCON-S Twin Gum 5 Minutes is presented as a grey epoxy adhesive in twin-component packaging. Rapid Plastic Steel Transparent Adhesive 5 Min. is the transparent alternative shown in the catalogue. Colour, curing behaviour and service temperature belong to the individual reference; the five-minute product name should not be treated as a full-service cure time.

Repair putties

PRO-MIX and Mini PRO-MIX are plastic-steel repair putties. The catalogue expressly states that Mini PRO-MIX does not adhere to rubber or similar elastic materials. Aqua Mix Bond is shown as a 57 g kneadable repair reference for selected rigid materials, including metal, ceramic, wood, glass and cement-based surfaces.

For Aqua Mix Bond, the catalogue lists a working time of 3 minutes after kneading at 20°C, standard hardening in 15 minutes at 20°C and underwater hardening in 20 minutes at 20°C. These figures relate to this reference and stated temperature. Confirm full cure, substrate compatibility and service conditions using the current technical data sheet. Soft or flexible surfaces such as rubber and sponge are excluded in the source.

Threaded assemblies

The same catalogue includes low-strength and medium-strength anaerobic threadlockers, plus Pipe Lock PTFE anaerobic adhesive. Specify thread material, size, gap and the required disassembly behaviour. Threadlockers and pipe sealants are distinct from general epoxy adhesives and should be selected against their own technical instructions.

Prepare your quotation request

Provide the reference or intended repair, substrate materials, joint dimensions, required colour, temperature exposure, quantities and destination. State whether the assembly must be removable, paintable or machinable after cure. Pack size, current availability, minimum quantities and delivery terms will be confirmed in the quotation.

Request the current technical data sheet and safety data sheet for the chosen formulation. Repairs involving pressure, structural loading, fuel or potable-water contact require specific product suitability and design review; catalogue examples alone do not establish an approved repair.

View the original adhesives catalogue · Explore Chemicals catalogues