Metal-Filled Epoxies

Descrizione

Metal-Filled Epoxies

This selection focuses on ALCON Metallised Plastic Steel, an epoxy-based industrial adhesive containing steel powder. The original catalogue identifies iron and iron alloys as its intended substrates. It is a specific metallic-grey repair and bonding reference, separate from the rapid transparent epoxies and general-purpose putties in the wider range.

Catalogue specification

• Material family: epoxy adhesive containing steel powder.
• Intended substrates: iron and iron alloys, subject to the condition and preparation of the surface.
• Colour: metallic grey.
• Catalogue curing reference: 8–12 hours at room temperature.
• After hardening: the source describes the material as machinable and drillable.
• Catalogue heat-resistance reference: +120°C, with temporary exposure stated as +160°C. Confirm the current data sheet, duration and conditions for the proposed service.

Define the repair before selecting

Share the component material, repair geometry, gap or missing section, working temperature and expected exposure to water, oils or other chemicals. State whether drilling, machining or a surface finish is required after cure. Mixing ratio, surface preparation, working time and full-service cure must follow the current instructions for the exact product.

The catalogue uses the phrase “cold welding” for this adhesive. That description does not establish weld-equivalent structural strength or approval for a pressure-retaining repair. Any load-bearing or safety-critical repair needs an appropriate engineering assessment and product-specific documentation.

Packaging and quotation

The source shows paired adhesive and catalyst containers. Request the required set size and quantity; current pack weights, availability, storage life and delivery terms are confirmed in the offer. Include the destination and target delivery date, and request the technical data sheet and safety data sheet with the selected reference.

The original catalogue page also shows a separate bumper and dashboard repair kit below the metal-filled epoxy. That plastic-repair formulation is not the product described above.

View the original catalogue — metal-filled epoxy on page 4 · Explore general-purpose epoxy adhesives and repair putties